YPerformance 500 PSI Universal Pressure Sensor

500 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8″ NPT Male Thread. Includes: 500 PSIg Stainless Sensor, Connector, Pins & 1/8″ NPT to -4 Adapter

Gauge Style (PSIg) Pressure Sensors

YPerformance offers high-quality stainless steel PSIg sensors in 60, 150, 500, 1000, and 2000. Pressure exceeding atmospheric pressure is referenced via gauge-style pressure sensors. Gauge-style pressure sensors cannot detect atmospheric pressure and read as 0 psig. Common applications for gauge-style pressure sensors include nitrous, brake, fuel, and oil pressure.

YP 500-2020 – 500 PSI PRESSURE SENSOR INSTALLATION INSTRUCTION

Which Pressure Sensor is right for you?

Many different tools can be used for measurement, but the degree of accuracy is dependent upon the tool. For example, a ruler can measure distance with a good degree of accuracy, but for a more precise measurement, a caliper should be used. The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:

Brass Pressure Sensor = Ruler

Use a Brass Pressure Gauge Sensor where you need a good reference to what pressure is being seen.

Example: Brass Pressure Sensor used for a Boost Gauge – Reference/Information for knowing manifold pressure, not for ECU calibration.

Stainless Steel Pressure Sensor = Caliper

Use an SS Pressure Sensor where you need exact details of the pressure.

Example: MAP Sensor information for the ECU – Calibration/crucial information for the ECU.

500 PSI Pressure Sensor Features:

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area)
• Connector and pins included

500 PSI Pressure Sensor Fitment:

This YP pressure sensor has been tested and is compatible with Fluid and Air: (Trans Fluid, Gasoline, Oxygenated Fuels, Methanol, Oil, Coolant, Water, Air, CO2, Brake Fluid, and more)

500 PSI Pressure Sensor Plug Kit:

YP offers a 500 PSI Pressure Sensor Kit.

This kit includes 500 PSI pressure sensors, connectors, and pins.

Find the specifications of our fluid temperature sensors below.

Specifications:

Voltage: DC 5V

Input: 0-500 psi

Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V and 500 psi outputs 4.5V

Accuracy: +/-0.5%FS

Thread: 1/8″ NPT

Wiring: Red for +5V; Black for ground; Green for signal output

Overload Capacity: 2-4 times of rated pressure

Working Temperature: -40℃~+120℃

Compensation Temperature: -20—+80oC

Pressure Medium: The gas and liquid which is compatible with 316L stainless steel

Load Resistance: ≤(supply power-6.5V/0.02A)Ω

Long-term Stability: Less than 0.1%FS/year

Response Time: ≤1ms