Uses bipolar op-amp circuitry with thin-film resistor networks and a silicon pressure element to measure manifold absolute pressure on a true linear 0–5V scale. Temperature compensation circuitry maintains accuracy across the full operating range, eliminating the need to re-tune at different altitudes — unlike competitor sensors that use non-linear scaling.
Nissan GTR Omni Power 4 Bar MAP Sensor
Out Of Stock
700
Key Features
- Withstands more than 130 PSI without leaking
- Operating range: -40°F to 260°F
- Fastest response time on the market: 10%–90% of scale in 0.001 seconds
- Automatic temperature compensation
- True linear scaling for perfect drivability at all boost and vacuum levels
- Compatible with all aftermarket engine management systems
- Minimum 99% accuracy over full-scale range under all conditions
- Plug-and-play — dimensionally identical to stock MAP sensor; no harness cuts
- Hand-assembled and pressure-checked in the USA
Out of stock
What's Included
- GTR Omni Power 4 Bar MAP Sensor
Fits These Vehicles
- 2009+ Nissan GT-R (R35)
Technical Specifications
| Spec | Value |
|---|---|
| Type | 4 Bar absolute pressure (PSIa) |
| Pressure Range | 1–43+ PSI (up to 44 PSI measureable) |
| Accuracy | Minimum 99% over full-scale range |
| Operating Temperature | -40°F to 260°F (with auto temperature compensation) |
| Accuracy Temp Range | 32°F to 180°F |
| Response Time | 0.001 seconds (10%–90% of scale) |
| Burst Pressure | 130+ PSI |
| Output Scale | True linear 0–5V |
| Pin Count | 4-pin (includes built-in temperature sensor) |
| Housing | OEM-dimensional black case, labeled "4BAR" |
| Assembly | Hand-assembled and tested in USA |
Compatibility Notes
- This is NOT a stock replacement sensor — the car must be tuned after installation
- Works with stock ECU or any aftermarket engine management system
- 4 Bar range: suitable for high-boost applications exceeding 24 PSI
How It Works
Installation
Plug-and-play using factory R35 hardware and harness connector — no harness modifications needed
Performance Claims
- Accurate boost control above 24 PSI (stock sensor cannot read accurately beyond this point)
- Allows higher boost levels with retained factory boost-cut safety feature
- Superior data collection for more precise tuning results
Additional information
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 13 × 13 × 8 cm |
Reviews
There are no reviews yet.